Giant Big Stik

Do you have something on the bench that you would like to share the progress with us. Shoot some pics of the different stages of your project and post 'em here!
Post Reply
User avatar
kdoughty
Wing Commander
Posts: 190
Joined: Sun Jul 24, 2011 4:31 pm
Location: NW OKC

Giant Big Stik

Post by kdoughty » Thu Dec 27, 2018 2:53 pm

Santa brought me a "Giant Big Stik" for Christmas .Just what I needed , another plane. :roll: I will post a few pictures as I put it together. luckily I already have everything I need to make it fly. It has a 80.5 wingspan. Weights about 14 lbs. I will be putting a DLE 30 engine in it and a pitts muffler with smoke. It's supposed to take about 14 hours to build . I figure it will take me about 14 Days!!! :oops:
Attachments
1117181224-00.jpg
1117181325-00.jpg

User avatar
kdoughty
Wing Commander
Posts: 190
Joined: Sun Jul 24, 2011 4:31 pm
Location: NW OKC

Re: Giant Big Stik

Post by kdoughty » Fri Dec 28, 2018 11:31 am

Well I looked in the box today. At least that's a start. More to come later. :D
Attachments
1118180940-00.jpg
1117181326-00.jpg
1117181325-01.jpg

User avatar
kdoughty
Wing Commander
Posts: 190
Joined: Sun Jul 24, 2011 4:31 pm
Location: NW OKC

Re: Giant Big Stik

Post by kdoughty » Sat Dec 29, 2018 11:05 am

The next step is to start putting parts together. So far so good. :D
Attachments
1118181150-00.jpg
1123181653-00.jpg
1123181653-01.jpg

User avatar
kdoughty
Wing Commander
Posts: 190
Joined: Sun Jul 24, 2011 4:31 pm
Location: NW OKC

Re: Giant Big Stik

Post by kdoughty » Sun Dec 30, 2018 12:40 pm

I'm still working on the Stik. On utube the biggest complaint was the plane tends to be tail heavy , so I'm going to put all the things I can in the nose of the plane. It's getting a little crowded. I created a raised floor so I could put some below and some above.

A list of things in the nose.

throttle servo
ignition module
4.8 volt ignition volt battery
6 volt receiver battery
6 volt smoke battery
smoke pump
switches
all related fuel lines.
Attachments
1126181859-00.jpg
1126182040-00.jpg
1222181351-00.jpg

User avatar
kdoughty
Wing Commander
Posts: 190
Joined: Sun Jul 24, 2011 4:31 pm
Location: NW OKC

Re: Giant Big Stik

Post by kdoughty » Mon Dec 31, 2018 12:09 pm

I got a little more done on the Stik. Stay tuned , more to come. I'm doing it a little at a time.
I'm trying to make it last as long as I can. It's going to be a long winter. ;)
Attachments
1123181653-02.jpg
1126182042-01.jpg
1206181511-00.jpg

User avatar
kdoughty
Wing Commander
Posts: 190
Joined: Sun Jul 24, 2011 4:31 pm
Location: NW OKC

Re: Giant Big Stik

Post by kdoughty » Tue Jan 01, 2019 12:47 pm

The Stik is coming along slowly , but at least it's coming along. :oops:

I made a cowl to cover the engine, It gives it a more finished look. :D

Also, the wheels are not the ones that came with the ARF. They are ones that someone gave me. Looks more like a world war 1 airplane.
Attachments
1208181345-00.jpg
1209181604-00.jpg
1211181027-00.jpg
1211181028-00.jpg

User avatar
kdoughty
Wing Commander
Posts: 190
Joined: Sun Jul 24, 2011 4:31 pm
Location: NW OKC

Re: Giant Big Stik

Post by kdoughty » Wed Jan 02, 2019 12:23 pm

Things went a lot faster when I got to the wings. All I had to do was install the servos and CA the flaps and ailerons in the precut slots. The wing is in two pieces with a wing tube. I decided to put a Pilot I had on it. I had to make a plate to mount the pilot on and join the wing together,, Even putting all the weight I could in the nose ,it still needed 10 oz. of weight on the fire wall to get it to balance on the recommend CG. All done, the total weight came out about 14 lbs. It should have unlimited vertical . :D
The Stik is ready to test. :D
Attachments
1218181247-00.jpg
1218181248-00.jpg
1218181248-01.jpg
1218181248-02.jpg

Post Reply