Westside R/C Flyers

Hey Guys Here's a link to a U-Tube video of the real Coastguard plane I copied.

https://www.youtube.com/watch?v=mG2F_Ge_x8Q

OK the Day is finally here!! The Cessna is FINISHED!!! As soon as I check the programing on the Taranis Radio it will be ready to fly. Here some of the final pictures.

Well I almost got'er done. :D I installed all the wing hardware and test fitted the wing with the wing struts in place, and checked the CG. I must be living right, It was SPOT ON . No weights required. And the GREAT NEW , I weighted the plane ,And the dry weight was only 12.67 LBS ready to fly ,less...

I got the Flaps and Ailerons Epoxied in place. Next comes the wing tips. At this point, it's like working on an ARF.

I'm finally finished with the Monokote. Next I need to clean up the room and get ready to install the Flaps and ailerons and then the servos , control horns and push rods.

I got the Flaps covered. Next is the ailerons and that will be the last of the covering. I also found a easy way to clear the Monokote that covers the holes for the pin hinges. I used a small soldering iron and burned out the covering. It made a nice clean hole.

Well I got the top of wing done . Next I need to cover the Flaps and Ailerons . I'm being to think I may finish it in MY LIFE TIME!!

Here's a couple of pictures finishing the bottom of the wing. Next it's on to the top of the wing.

OK I finally got back on the Cessna.
I started covering the wing. I started on the bottom first. Next is the top and then the flaps and ailerons. Then I'll be ready to install all the servos and add the Decals. I'm going to try to get it ready before the next meeting.

Here's a couple more pictures.